Standard H Beam Dimensions Multi-Specification Matel Beam

H-shaped steel is an economical cross-sectional steel with better cross-sectional mechanical properties developed from the optimization of I-shaped steel, especially the cross-sectional shape is the same as the English letter "H". Its characteristics are as follows:

Wide flange and large lateral stiffness. Strong bending resistance, about 5%-10% higher than I-shaped steel.

The two surfaces of the flange are parallel to each other, making connection, processing, and installation simple.

Compared with welded I-beams, it has low cost, high precision, low residual stress, no need for expensive welding materials and weld inspection, and saves about 30% of the cost of steel structure production.

Under the same cross-sectional load, the hot-rolled H-steel structure is 15%-20% lighter than the traditional steel structure.

Compared with concrete structures, hot-rolled H-steel structures can increase the usable area by 6%, while the self-weight of the structure is reduced by 20% to 30%, reducing the internal force of the structural design.

H-shaped steel is an economical section profile with more optimized cross-sectional area distribution and more reasonable strong weight ratio. It is named because its cross-section is the same as the English letter "H". Since all parts of H-shaped steel are arranged at right angles, H-shaped steel has the advantages of strong bending resistance, simple construction, cost saving and light structural weight in all directions, and has been widely used.