Factory Top Quality ASTM A36 A992 Hot Rolled Universal Q235B Q345B H Beam Steel Price for Sale

The flanges of H-beams are of equal thickness, with rolled cross-sections and combined cross-sections consisting of 3 welded plates. H-beams are all rolled cross-sections, and due to poor production technology, there is a 1:10 slope on the inside of the flange. The rolling of H-beam is different from that of ordinary H-beams with only one set of horizontal rolls, because its flange is wide and there is no slope (or the slope is very small), so it is necessary to add a group of vertical rolls to roll at the same time, so its rolling process and equipment are more complex than ordinary rolling mills. The maximum height of rolled H-beam that can be produced in China is 800mm, which exceeds the welded composite section.

The H-beam has a small side length and a large height, and can only withstand forces in one direction.

The H-shaped steel channel is deep and thick, and can withstand forces in both directions.

With the development of steel structure buildings, only H-beams are not enough, that is, thickened I-beams, which are used for load-bearing columns to be easy to be unstable.

H-beams can only be used for beams, while H-beams can be used for load-bearing columns of structures.

H-beam is an economical cross-section steel with better mechanical properties than H-beam, and is named because the shape of its section is the same as the English letter "H". The flange of hot-rolled H-beam is wider than that of H-beam, with greater lateral stiffness and strong bending resistance. Under the same specifications, the weight of H-beam is lighter than that of I-beam.

The H-beam flange is thick on the web and thin on the outside; The flange of the H-beam is an iso-wearing surface.

Q: What the main products you can supply?

A: We are a professional and famous factory in China. The main products of our company include Stainless Steel Sheet/ Coils/ Tubes/ Bars/ Corrugated Sheets, Carbon Steel Sheets/ Coils/ Tubes, Galvanized Sheets/ Coils/ Tubes/ Bars/ Corrugated Sheets, PPGI/PPGL Sheets, PPGI/ PPGL Coils, PPGI/ PPGL Corrugated Sheets, Ductile Iron Pipe, Copper, Aluminum, etc. 

Q: What is your payment terms?

A:Commonly two payment term for new customers 

1) 30%T/T as deposit, 70% balance against B/L copy. 

2) 100% Irrevocable L/C at sight.

If you need other terms, please feel free to contact us. We will try our best.

Q: How about the samples? Is it free or extra fees?

A: Usually, we would like to supply the samples before order. If the samples are ready stock, it will be free. If the samples are not ready stock, we will charge some reasonable cost. But this amount will be deducted from your first order invoice. 

Q: How long is your delivery time?

A: Our daily inventory is more than 8000 tons, so common products size orders just need 7 days from stocks. If there are special size orders, it will cost 7-15 days.